DP-filter Smooth Technology: Pass to Pass Solution for Agricultural Guidance Systems

Carrier phases offer superior accuracy, reduced noise, and increased resistance to multipath effects. Drawing from these advantages, the DP-filter refines relative positioning precision, ensuring smooth and consistent outcomes unaffected by pseudorange inaccuracies. When engaged, this filter delivers consistent position error and assures a smooth (pass to pass) accuracy within the sub-meter to centimeter range.

Here shows how to enable the Smooth mode for SinoGNSS K8 series OEM modules.

● Enable the feature: Begin by sending the command `Set smoothedpvt on`. This instruction activates the smooth mode.

●Save the configuration: Once you've activated the mode, make sure you save the configuration. Do this by sending the command `Saveconfig`.

Fig. 2 Activating the Smooth Mode

Note: If you wish to deactivate the Smooth Mode later on, simply send the command `set smoothedpvt off`.

To check if your OEM board is operating in the smooth mode:

● Output the `GPGGA` message.

● In the displayed message, inspect the solution status. If it reads `E,1`. Moreover, the differential age value should be `99`. It indicates that the board is in smooth mode.

For instance, the message should resemble the following format: 

`$GPGGA,000359.00,3125.4999742,N,12136.9969461,E,1,07,2.5,10.4541,M,11.371,M,99,00 00*4C`

Fig. 3 Verifying the Smooth Mode Activation

ComNav Technology conducted tests on the DP-filter smoothing function of the K803 Lite module. The results provided insights into the DP-filter smooth function's performance and applications.

- Environment: The test was done at roof of ComNav Technology's building to minimize interference from obstacles.

 

Fig. 4 Testing route on Google Earth map

 

- Procedure:

- The GNSS modules and antenna were installed on a trolley.

- The trolley was pushed repeatedly along a straight line in a consistent direction.

- The accuracy of the K803 Lite was measured by comparing its multiple trajectories and contrasting with RTK trajectories.

 

Fig. 5 Testing route

 

The DP-filter is particularly valuable in scenarios requiring high relative position precision and consistent performance. One such application is in agricultural guidance systems. Ensuring a tractor or harvester remains on a consistent path, unaffected by GNSS drifts, can translate to substantial savings and increased operational efficiency for farmers.

Fig. 7 Precision Agriculture

●Reduced GNSS Drifts: Tractors, harvesters, and other agricultural machinery equipped with DP-filter can benefit from reduced GNSS drifts. GNSS drifts, a common challenge, can cause machinery to deviate from its designated path, leading to uneven seeding or wasteful overlaps during crop treatment. By ensuring that these machines adhere to a consistent trajectory, the DP-filter can significantly reduce operational inefficiencies.

●Substantial Savings: Precision agriculture, with the help of tools like the DP-filter, can translate into considerable cost savings for farmers. Fewer resources are wasted, there's reduced wear and tear on machinery due to fewer unnecessary passes, and crops can be managed more effectively, leading to higher yields.

●Optimized Resource Use: When machinery follows the exact path without deviations, there's optimal utilization of water, fertilizers, and other inputs, which not only saves costs but also promotes sustainable farming practices.

SinoGNSS K-series OEM boards provide reliable pass-to-pass performance, making it a low cost GNSS module for applications especially for precision agriculture, as it requires no correction input and internet access. For more information of our GNSS modules/GNSS boards/GNSS receivers, you can visit our website by this link:

https://www.comnavtech.com/Products/1625390818125623296.html