FAQ

In point to point mode, the correction data is transmitted from the base station to the server, then rovers can log on the server to get the correction data.

T300 Plus can use as Base station to provide corrections for DJI Phantom4 RTK version. Here will introduce the T300 plus and DIJ Phantom4 settings.

Start the Survey Master and connect the N2 to your controller. Step1: Device --> NMEA 0183 Output Step2: Choose the Bluetooth, set baud rate, and output NMEA that you want. BTW, you can choose “Continue output when receiver restart”

Login Microsurvey license system: https://license.microsurvey.com/solo/customers/CustomerHome.aspx

Before starting your work, you should configure and check your receiver by CRU software.